Cisco D9854 User Manual

4-92 Model D9854 Advanced Program Receiver Installation and Operation Guide 4021470 Rev D
Setup Menu: Noise Cutoffs, Continued
Note: Muting Control must be set to Enable for these settings to be active.
Audio Default C/N Margin Relationship
Restore Defaults
Description: This restores the RF options to their factory set (default) values.
Parameters: Yes, No.
Muting Control
Description: This allows you to mute the transport stream and audio in the event
of an unstable signal, poor signal or no signal condition.
Parameters: Enable, Disable. The default is Enable.
Audio Cutoff
Audio Restore
0.1
0.0
Audio Muted
Audio Restored
A
udio
C/N Margin

Cisco D9854 Specifications

General

Model	D9854
Category	Receiver
Output	ASI, IP
Decoding	MPEG-2
Conditional Access	BISS
Receiver Type	Professional IRD
解密	DVB-CSA, BISS, AES
Input Frequency Range	950 MHz to 2150 MHz
Modulation Formats	QPSK, 8PSK
Symbol Rate	1 to 45 Msps
Power Supply	100-240 VAC, 50/60 Hz
Power Consumption	40W (typical)
Operating Temperature	0°C