Cisco D9854 - Page 156

4-94 Model D9854 Advanced Program Receiver Installation and Operation Guide 4021470 Rev D
About Menu, Continued
Master UA
Description: Indicates the Master User Address (UA), which is required to
request program authorization from the uplink.
Ver
Description: Indicates the unique version number of the receiver.
Serial Number
Description: Indicates the unique serial number of the receiver.
Customer Code
Description: Indicates the unique Customer Code assigned to an organization by
Cisco.
Board ID
Description: Indicates the board type.
Revision
Description: Indicates the board revision number.
MAC Address
Description: Indicates the MAC address of the Ethernet port.
FPGA Type
Description: Indicates the FPGA type/number information.
SDI
Description: Indicates whether the receiver is equipped with an SDI output.
MPEGoIP
Description: Indicates whether the receiver is equipped with an MPEG over IP
output.
LICENSES
Feature
Description: Displays a list of software licenses for the D9854 Advanced
Program Receiver.
Parameters: HD Decode, H.264 Decode, DVB-S2, MPEGoIP Out.
Enb
Description: Indicates whether the selected software license is enabled or
disabled.
Parameters: Yes or No.
Note: All software licenses are enabled for this release (temporarily). Any of these
required licenses will need to be purchased from Cisco in subsequent software
releases.