Cisco D9854 User Manual

4021470 Rev D D9854 Advanced Program Receiver Installation and Operation Guide 5-11
Non-Enc Data pkts
passed
The current Non-Encrypted Addressed Data Packet
count. This count indicates the amount of
transmitted ADP information being accurately
received and processed. Ideally, the ADP Enc Pass
and ADP Enc Total numbers should be identical.
Non-Enc Data pkts
recvd
The current Non-Encrypted Addressed Data Packet
Count. These counts indicate the amount of
transmitted ADP information which is being
accurately received and processed. Ideally, the ADP
Non-Enc Pass and ADP Non-Enc Total numbers
should be identical.
Status Description

Cisco D9854 Specifications

General

Model	D9854
Category	Receiver
Output	ASI, IP
Decoding	MPEG-2
Conditional Access	BISS
Receiver Type	Professional IRD
解密	DVB-CSA, BISS, AES
Input Frequency Range	950 MHz to 2150 MHz
Modulation Formats	QPSK, 8PSK
Symbol Rate	1 to 45 Msps
Power Supply	100-240 VAC, 50/60 Hz
Power Consumption	40W (typical)
Operating Temperature	0°C