Cisco D9854 User Manual

4021470 Rev D D9854 Advanced Program Receiver Installation and Operation Guide 5-19
Viewing the Services Status, Continued
The following table describes the PID information displayed:
PID Information Description
Channel The Program Entry number (PE1 to PE16).
Type Name assigned to the Program Entry, up to 4
alphanumeric characters.
Detail Displays any detail associated with the program PID
(e.g., MPG2 PID). The parameters are: MPG1 VID,
MPG2 VID, 422 VID, H264 VID, HD VID, MPG4
VID, MPG AUD, MPG2 AUD, DVB AC3, DVB DDP,
AAC AUD, HEAAC, AUD, MPG4 AUD, DBE AUD,
DTS AUD, DVB TXT, DVB VBI, DVB SUBT, DVB
ASYN, DVB SYNS, DVB SYND, DVB MPE, DVB
DCAR, DVB OCAR, SA VBI, ATSC AC3, ATSC
DDP, SA UTLD, SCTE DPI, SA HSD, SA CDDL, SA
WBD, SA SUBT, ECM, EMM, PCR, or UNKNOWN.
PID The program PID number, in the range from 1 to
8192.
Present Indicates whether the PID is present in the incoming
stream (Yes or No).

Cisco D9854 Specifications

General

Model	D9854
Category	Receiver
Output	ASI, IP
Decoding	MPEG-2
Conditional Access	BISS
Receiver Type	Professional IRD
解密	DVB-CSA, BISS, AES
Input Frequency Range	950 MHz to 2150 MHz
Modulation Formats	QPSK, 8PSK
Symbol Rate	1 to 45 Msps
Power Supply	100-240 VAC, 50/60 Hz
Power Consumption	40W (typical)
Operating Temperature	0°C