5-30 Model D9854 Advanced Program Receiver Installation and Operation Guide 4021470 Rev D
Configuring the Common Interface (CI) Information, Continued
9. Select Enable in the Use ONID Check drop-down if you want to restrict the
incoming transport stream to the transport ID and transport original network ID
listed below. If the incoming stream does not match the specified transport
stream, the CAM will not decrypt. The default is Disable.
10. If you set the Use ONID Check to Enable, you must define the Transport ID
and Original Network ID. If the incoming stream does not match the specified
IDs here, the CAM will not decrypt. You can enter a value in a range from 0 to
65535.
11. Click Save.
To Next Page
Loading...
