Cisco D9854 User Manual

4021470 Rev D Model D9854 Advanced Program Receiver Installation and Operation Guide A-1
Appendix A
Technical Specifications
Overview
Introduction
This appendix contains the technical specifications for the Model D9854 Advanced
Program Receiver.
Note: The technical specifications are subject to change without prior notice.
In This Appendix
This appendix contains the following topics.
Topic See Page
Section A - L-Band Input and Processing A-3
General A-3
LNB LO Stability A-3
LNB Power and Control A-3
DVB-S/DVB-S2 A-4
Section B - Video Inputs/Outputs and Processing A-7
General A-7
Video Outputs A-8
Embedded Data in SDI A-11
Audio Outputs A-12
Conditional Access A-12
Section C - Transport Stream Outputs A-13
ASI Output A-13
MPEGoIP Output (optional) A-13
Section D - Control and Management Interfaces A-14
Ethernet Management Interface A-14
RS-232 Data Interface A-14
Alarm Interface A-14
Contact Closure Interface A-15
Section E - Power and General Specifications A-16

Cisco D9854 Specifications

General

Model	D9854
Category	Receiver
Output	ASI, IP
Decoding	MPEG-2
Conditional Access	BISS
Receiver Type	Professional IRD
解密	DVB-CSA, BISS, AES
Input Frequency Range	950 MHz to 2150 MHz
Modulation Formats	QPSK, 8PSK
Symbol Rate	1 to 45 Msps
Power Supply	100-240 VAC, 50/60 Hz
Power Consumption	40W (typical)
Operating Temperature	0°C