Cisco D9854 User Manual

B-10 Model D9854 Advanced Program Receiver Installation and Operation Guide 4021470 Rev D
Factory Default Settings, Continued
Noise Cutoff
Parameter Default
SDTO Pass
BAT Pass
EIT Pass
TDT Pass
RST Pass
TOT Pass
DIT Pass
SIT Pass
ECM Pass
EMM Pass
DRT Pass
CDT Pass
Parameter Default
Trnsprt (DVB-S/DVB-S2 Marg) Cutoff 0.0
Trnsprt (DVB-S/DVB-S2 Marg) Restore 0.1
Audio (DVB-S/DVB-S2 Marg) Cutoff 0.0
Audio (DVB-S/DVB-S2 Marg) Restore 0.1
Muting Control Enable

Cisco D9854 Specifications

General

Model	D9854
Category	Receiver
Output	ASI, IP
Decoding	MPEG-2
Conditional Access	BISS
Receiver Type	Professional IRD
解密	DVB-CSA, BISS, AES
Input Frequency Range	950 MHz to 2150 MHz
Modulation Formats	QPSK, 8PSK
Symbol Rate	1 to 45 Msps
Power Supply	100-240 VAC, 50/60 Hz
Power Consumption	40W (typical)
Operating Temperature	0°C