Cisco D9854 User Manual

4021470 Rev D D9854 Advanced Program Receiver Installation and Operation Guide 1-5
Quick Setup Instructions for RF Acquisition, Continued
13. If the front LED is solid green, the unit is authorized. Proceed with Assigning a
Program Channel to a PE (Program Entry), page 1-6. If the front LED is flashing
green, the unit is unauthorized. Please contact your service provider and
provide the TID number for authorization. The TID can be found on the About
menu. To locate the TID, press MENU, press
! twice, and then SELECT. Make
a note of the TID number. Press MENU twice to return to the start-up screen.

Cisco D9854 Specifications

General

Model	D9854
Category	Receiver
Output	ASI, IP
Decoding	MPEG-2
Conditional Access	BISS
Receiver Type	Professional IRD
解密	DVB-CSA, BISS, AES
Input Frequency Range	950 MHz to 2150 MHz
Modulation Formats	QPSK, 8PSK
Symbol Rate	1 to 45 Msps
Power Supply	100-240 VAC, 50/60 Hz
Power Consumption	40W (typical)
Operating Temperature	0°C