Cisco D9854 User Manual

4-16 Model D9854 Advanced Program Receiver Installation and Operation Guide 4021470 Rev D
Status Menu: General, Continued
Enc
Description: Indicates whether the received signal is encrypted.
Parameters: Yes or No.
Scr
Description: Indicates whether the received signal is scrambled.
Parameters: Yes or No.
CA System
Description: Indicates the Conditional Access (CA) system used for the received
signal.
Parameters: SA or BISS.
Video
Description: Indicates the input stream type and source resolution of the
received signal/program.
Parameters: SD480i/2997, SD480i/3000, SD576i/2500, HD720p/5000, HD720p/
5994, HD720p/6000, HD1080i/2500, HD1080i/2997, HD1080i/
3000, Unknown or Unsupported.
Rate (Mbps)
Description: Indicates the bit rate of the received video program.
Alarms
Description: Displays the number of currently active Alarms.
Warnings
Description: Indicates the number of currently active Warnings.
Browse
Description: Select this option to scroll through the current alarms and warnings.
Clear All
Description: Select this option to clear all the current warnings and alarms. You
will be prompted to verify whether you want to clear all the alarms
and warnings.
Parameters: Abort, Continue. Select Abort to cancel the operation or Continue to
clear all the warnings and alarms.

Cisco D9854 Specifications

General

Model	D9854
Category	Receiver
Output	ASI, IP
Decoding	MPEG-2
Conditional Access	BISS
Receiver Type	Professional IRD
解密	DVB-CSA, BISS, AES
Input Frequency Range	950 MHz to 2150 MHz
Modulation Formats	QPSK, 8PSK
Symbol Rate	1 to 45 Msps
Power Supply	100-240 VAC, 50/60 Hz
Power Consumption	40W (typical)
Operating Temperature	0°C