4021470 Rev D D9854 Advanced Program Receiver Installation and Operation Guide 4-21
Status Menu: TS Input, Continued
Net Name
Description: Indicates the name assigned to the network.
Parameters: Up to 12 alphanumeric characters.
NetID
Description: Indicates the Network ID of the uplink signal the receiver is to
receive when using the selected preset. The receiver’s Network ID
must match the Network ID associated with the transmitted signal
that identifies the NIT to be used.
Note: Each network must be assigned a unique ID (number).
Parameters: 1 to 65535.
TxID
Description: Indicates the Transport ID.
Parameters: 1 to 65535.
LNB Stat
Description: Indicates the current LNB connection status.
Parameters: No Load, Overloaded, OverTemp, Short Circuit, Disabled, Normal
or N/A.
Polar
Description: Indicates the polarity of the received signal.
Parameters: H (Horizontal), V (Vertical) or Off.
LO Select
Description: Indicates whether a 22 kHz tone is available on input port RF1. This
is applicable for dual-band applications.
Parameters: On or Off.
PROGRAM PIDS
PE
Description: Indicates the Program Entry number.
Parameters: PE1 to PE16.
Stream
Description: Indicates the name assigned to the Program Entry.
Parameters: Up to 4 alphanumeric characters.
To Next Page
Loading...
Need help?
General
