44-38
Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7
OL-8978-04
Chapter 44 Configuring Network Admission Control
Configuring Network Admission Control with LAN Port 802.1X
To enable or disable the session timeout override for LAN port 802.1X, perform this task in privileged
mode:
This example shows how to enable the session timeout override for LAN port 802.1X:
Console> (enable) set port dot1x 5/8 re-authperiod server enable
Port 5/8 session-timeout-override option is enabled
Console> (enable)
This example shows how to display the session timeout override setting for LAN port 802.1X:
Console> (enable) show port dot1x 5/8
Port Auth-State BEnd-State Port-Control Port-Status
----- ------------------- ---------- ------------------- -------------
5/8 - - force-authorized -
Port Port-Mode Re-authentication Shutdown-timeout Control-Mode
admin oper
----- ------------- ----------------- ---------------- ---------------
5/8 SingleAuth disabled disabled Both -
Port Posture-Token Critical-Status Termination action Session-timeout
----- ------------- --------------- ------------------ ---------------
5/8 - - - -
Port Session-Timeout-Override Url-Redirect
----- ------------------------ ----------------------------------
5/8 enabled -
Port Critical
----- --------
5/8 disabled
Console> (enable)
Task Command
Enable or disable the session timeout override
for LAN port 802.1X.
set port dot1x mod/port re-authperiod server
{disable | enable}
To Next Page
Loading...
Need help?
General