Cisco WS-C6506 - Show Commands

15-109
Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7
OL-8978-04
Chapter 15 Configuring Access Control
Configuring Policy-Based Forwarding
show Commands
To display all the PBF maps, perform this task in normal mode:
This example shows how to display all the PBF maps:
Console> (enable) show pbf-map
PBF MAP
Clients Gatways
---------------------------------------------
cl1 gw1
Console> (enable)
To display the PBF client configuration, perform this task in normal mode:
This example shows how to display the PBF client configuration:
Console> (enable) show pbf client
Client : cl1
Map : gw1
VLAN : 101
Adjacency ip mac
------------------------------------------
.c0001cl1 21.1.1.1 00-00-00-00-40-01
Console> (enable)
To display the PBF-gateway configuration, perform this task in normal mode:
This example shows how to display the PBF-gateway configuration:
Console> (enable) show pbf gw
Client : gw1
Map : cl1
VLAN : 102
Adjacency ip mask mac
----------------------------------------------------------------
.g0002gw1 21.0.0.128 255.0.0.0 00-a0-c9-81-e1-13
Console> (enable)
Task Command
Display all the PBF maps. show pbf-map
Task Command
Display the PBF client configuration. show pbf client [client_name | ip_addr]
Task Command
Display the PBF-gateway configuration. show pbf gw [gw_name | ip_addr]