38-14
Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7
OL-8978-04
Chapter 38 Configuring Port Security
Configuring MAC-Address Monitoring
This example shows how to display the port security statistics on the system:
Console> (enable) show port security statistics system
Auto-Configure Option: Enabled
Module 2:
Total ports: 24
Total secure ports: 0
Total MAC addresses: 24
Total global address space used (out of 4096): 0
Status: installed
Module 3:
Total ports: 48
Total secure ports: 0
Total MAC addresses: 48
Total global address space used (out of 4096): 0
Status: installed
Module 5:
Total ports: 2
Total secure ports: 0
Total MAC addresses: 2
Total global address space used (out of 4096): 0
Status: installed
Total secure ports in the system: 0
Total secure MAC addresses in the system: 74
Total global MAC address resource used in the system (out of 4096): 0
Console> (enable)
Configuring MAC-Address Monitoring
These sections describe how to configure MAC-address monitoring:
• Configuring Global MAC-Address Monitoring, page 38-14
• Monitoring the MAC Addresses in the CAM Table, page 38-15
• Specifying the Polling Interval for Monitoring, page 38-16
• Specifying the Lower Threshold for MAC-Address Monitoring, page 38-16
• Specifying the Upper Threshold for MAC-Address Monitoring, page 38-17
• Clearing the Configuration for MAC-Address Monitoring, page 38-17
• Displaying the Configuration for the CAM Monitor, page 38-18
• Displaying the Global Configuration for the CAM Monitor, page 38-18
Configuring Global MAC-Address Monitoring
You can enable or disable MAC-address monitoring globally. Globally disabling MAC-address
monitoring does not clear any configuration.
To Next Page
Loading...
