18-10
Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7
OL-8978-04
Chapter 18 Configuring MVRP
Configuring MVRP on the Switch
Displaying MVRP State Machines
To display the MVRP state machines on the switch, perform this task:
This example shows how to display the MVRP state machines for port 3/14:
Console> (enable) show mvrp machines 3/14
MAD machine state:
Mod/Port VLAN Applicant: state & mgmt Registrar: state & mgmt
-------- ---- ----------------------------- -----------------------
3/14 0001 Aa: Anxious Normal, IN Registration_fixed
3/14 0142 Aa: Anxious Normal, MT Normal_registration
3/14 1002 Vo: Very_anxious Normal, MT Normal_registration
3/14 1003 Vo: Very_anxious Normal, MT Normal_registration
3/14 1004 Vo: Very_anxious Normal, MT Normal_registration
3/14 1005 Vo: Very_anxious Normal, MT Normal_registration
3/14 1006 Vo: Very_anxious Normal, MT Normal_registration
3/14 1007 Vo: Very_anxious Normal, MT Normal_registration
3/14 1008 Vo: Very_anxious Normal, MT Normal_registration
3/14 1009 Vo: Very_anxious Normal, MT Normal_registration
3/14 1010 Vo: Very_anxious Normal, MT Normal_registration
3/14 1011 Vo: Very_anxious Normal, MT Normal_registration
3/14 1012 Vo: Very_anxious Normal, MT Normal_registration
3/14 1016 Vo: Very_anxious Normal, MT Normal_registration
Console> (enable)
Displaying MVRP Trunks
To display the MVRP trunk information for the port, perform this task:
This example shows how to display the MVRP trunk information for port 3/14:
Console> (enable) show mvrp trunk 3/14
Port MVRP Pruned Vlans
----- -----------------------------------------
3/14 2-4094
Console> (enable)
Disabling MVRP on Individual Trunk Ports
To disable MVRP on the individual trunk ports, perform this task in privileged mode:
Task Command
Display the MVRP states on the port. show mvrp machines [vlan/mod/port]
Task Command
Display MVRP trunk information and VLANs
pruned.
show mvrp trunk [mod/port]
To Next Page
Loading...
