27-14
Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7
OL-8978-04
Chapter 27 Working with System Software Images
Uploading the System Software Images to an FTP or TFTP Server
Console> (enable) show version 5
Mod Port Model Serial # Versions
--- ---- ---------- --------- ----------------------------------------
5 1 WS-X6101 003414463 Hw : 1.2
Fw : 1.3
Sw : 3.2(6)
Console> (enable) copy tftp flash
IP address or name of remote host []? 172.20.52.3
Name of file to copy from []? cat6000-atm.3-2-7.bin
Download image tftp:cat6000-atm.3-2-7.bin to Module 4 FLASH (y/n) [n]? y
Download image tftp:cat6000-atm.3-2-7.bin to Module 5 FLASH (y/n) [n]? y
This command will reset Download Module(s) you selected.
Do you wish to continue download flash (y/n) [n]? y
-
Download done for module 4, please wait for it to come online
Download done for module 5, please wait for it to come online
File has been copied successfully.
Console> (enable) 07/21/1998,12:25:10:SYS-5:Module 4 is online
07/21/1998,12:25:10:SYS-5:Module 5 is online
Console> (enable) show version 4
Mod Port Model Serial # Versions
--- ---- ---------- --------- ----------------------------------------
4 1 WS-X6101 003414855 Hw : 1.2
Fw : 1.3
Sw : 3.2(7)
Console> (enable) show version 5
Mod Port Model Serial # Versions
--- ---- ---------- --------- ----------------------------------------
5 1 WS-X6101 003414463 Hw : 1.2
Fw : 1.3
Sw : 3.2(7)
Console> (enable)
Uploading the System Software Images to an FTP or TFTP Server
These sections describe how to upload the system software images from a switch to an FTP or TFTP
server:
• Preparing to Upload an Image to an FTP or TFTP Server, page 27-15
• Uploading the Software Images to an FTP or TFTP Server, page 27-15
Note For more information on working with the system software image files on the flash file system, see
Chapter 26, “Working With the Flash File System.”
To Next Page
Loading...
Need help?
General