EasyManua.ls Logo

Cisco WS-C6506 - Deleting a Private VLAN

Cisco WS-C6506
1488 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11-28
Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7
OL-8978-04
Chapter 11 Configuring VLANs
Configuring Private VLANs on the Switch
Console> (enable) show pvlan capability 3/1
Port 3/1 cannot be made a private vlan port due to:
------------------------------------------------------
Promiscuous ports cannot be made private vlan ports.
Console> (enable) show pvlan capability 5/1
Ports 5/1 - 5/12 are in the same ASIC range as port 5/1.
Port 5/1 cannot be made a private vlan port due to:
------------------------------------------------------
Trunking ports are not Private Vlan capable.
Conflict with Promiscuous port(s) : 5/2
Console> (enable) show pvlan capability 5/2
Ports 5/1 - 5/12 are in the same ASIC range as port 5/2.
Port 5/2 cannot be made a private vlan port due to:
------------------------------------------------------
Promiscuous ports cannot be made private vlan ports.
Conflict with Trunking port(s) : 5/1
Console> (enable) show pvlan capability 5/3
Ports 5/1 - 5/12 are in the same ASIC range as port 5/3.
Port 5/3 cannot be made a private vlan port due to:
------------------------------------------------------
Conflict with Promiscuous port(s) : 5/2
Conflict with Trunking port(s) : 5/1
Console> (enable) show pvlan capability 15/1
Port 15/1 cannot be made a private vlan port due to:
------------------------------------------------------
Only ethernet ports can be added to private vlans.
Deleting a Private VLAN
You can delete a private VLAN by deleting the primary VLAN. If you delete a primary VLAN, all
bindings to the primary VLAN are broken, all ports in the private VLAN become inactive, and any
related mappings on the promiscuous port(s) are deleted.
To delete a private VLAN, perform this task in privileged mode:
This example shows how to delete primary VLAN 7:
Console> (enable) clear vlan 7
This command will de-activate all ports on vlan 7
Do you want to continue(y/n) [n]?y
Vlan 7 deleted
Console> (enable)
Task Command
Delete a primary VLAN. clear vlan primary_vlan

Table of Contents

Related product manuals