19-7
Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7
OL-8978-04
Chapter 19 Configuring Dynamic Port VLAN Membership with VMPS
Configuring VMPS and Dynamic Port VLAN Membership on the Switch
To clear the VMPS statistics, perform this task in privileged mode:
To clear a VMPS server entry, perform this task in privileged mode:
To reconfirm the dynamic port VLAN membership assignments, perform this task in privileged mode:
This example shows how to reconfirm dynamic port VLAN membership assignments:
Console> (enable) reconfirm vmps
reconfirm process started
Use 'show dvlan statistics' to see reconfirm status
Console> (enable)
To download the VMPS database manually (to download a changed database configuration file or retry
after a failed download attempt), perform this task in privileged mode:
Configuring Static VLAN Port Membership
To return a port to static VLAN port membership, perform this task in privileged mode:
Task Command
Clear the VMPS statistics. clear vmps statistics
Task Command
Clear a VMPS server entry. clear vmps server ip_addr
Task Command
Step 1
Reconfirm the dynamic port VLAN membership
assignments.
reconfirm vmps
Step 2
Verify the dynamic VLAN reconfirmation status. show dvlan statistics
Task Command
Step 1
Download the VMPS database from the TFTP
server, or specify a different VMPS database
configuration file.
download vmps
Step 2
Verify the VMPS database configuration file. show vmps
Task Command
Step 1
Configure the static port VLAN membership
assignments to a port.
set port membership mod/port static
Step 2
Verify the static port assignments. show port [mod[/port]]
To Next Page
Loading...
