Cisco WS-C6506 - Show Authentication

39-18
Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7
OL-8978-04
Chapter 39 Configuring the Switch Access Using AAA
Configuring Authentication on the Switch
kerberos disabled disabled disabled
local * enabled(primary) enabled(primary) enabled(primary)
attempt limit 3 3 -
lockout timeout (sec) disabled disabled -
Enable Authentication: Console Session Telnet Session Http Session
---------------------- ----------------- ---------------- ----------------
tacacs disabled disabled disabled
radius disabled disabled disabled
kerberos disabled disabled disabled
local * enabled(primary) enabled(primary) enabled(primary)
attempt limit 3 3 -
lockout timeout (sec) disabled disabled -
* Local User Authentication enabled.
Console> (enable)
Disabling Local User Authentication
To disable local user authentication on the switch, perform this task in privileged mode:
This example shows how to disable local user authentication for the switch and how to verify the
configuration:
Console> (enable) set localuser authentication disable
local user authentication set to disable.
Console> (enable) show authentication
Login Authentication: Console Session Telnet Session Http Session
--------------------- ---------------- ---------------- ----------------
tacacs disabled disabled disabled
radius disabled disabled disabled
kerberos disabled disabled disabled
local * enabled(primary) enabled(primary) enabled(primary)
attempt limit 3 3 -
lockout timeout (sec) disabled disabled -
Enable Authentication: Console Session Telnet Session Http Session
---------------------- ----------------- ---------------- ----------------
tacacs disabled disabled disabled
radius disabled disabled disabled
kerberos disabled disabled disabled
local * enabled(primary) enabled(primary) enabled(primary)
attempt limit 3 3 -
lockout timeout (sec) disabled disabled -
* Local User Authentication disabled.
Console> (enable)
Task Command
Step 1
Disable local user authentication. set localuser authentication disable
Step 2
Verify the local authentication configuration. show authentication