Cisco WS-C6506 - Page 929

38-13
Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7
OL-8978-04
Chapter 38 Configuring Port Security
Configuring Port Security on the Switch
This example shows how to display the port security configuration information and statistics:
Console> (enable) show port security 4/1
* = Configured MAC Address
Port Security Violation Shutdown-Time Age-Time Maximum-Addrs Trap IfIndex
----- -------- --------- ------------- -------- ------------- -------- -------
4/1 enabled shutdown 120 1440 25 disabled 3
Port Secure-Src-Addrs Age-Left Last-Src-Addr Shutdown Shutdown-Time-Left
---- ----------------- -------- ----------------- -------- ------------------
4/1 00-11-22-33-44-55 4 00-11-22-33-44-55 No -
00-10-14-da-77-f1 100
Port Flooding on Address Limit
----- -------------------------
4/1 Enabled
Console> (enable) show port security statistics 4/1
Port Total-Addrs Maximum-Addrs
----- ----------- -------------
4/1 4 10
Console> (enable)
This example shows how to display the port security statistics on a module:
Console> (enable) show port security statistics 7
Port Total-Addrs Maximum-Addrs
----- ----------- -------------
7/1 0 1
7/2 0 1
7/3 0 1
7/4 0 1
7/5 0 1
7/6 0 1
7/7 0 1
7/8 0 1
7/9 0 1
7/10 0 200
7/11 0 1
7/12 0 1
7/13 0 1
7/14 0 1
7/15 0 1
7/16 0 1
7/17 0 1
7/18 0 1
7/19 0 1
7/20 0 1
7/21 0 1
7/22 0 1
7/23 0 1
7/24 0 1
Module 7:
Total ports: 24
Total secure ports: 0
Total MAC address(es): 223
Total global address space used (out of 4096): 199
Status: installed
Console> (enable)