Cisco WS-C6506

Index
IN-2
Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7
OL-8978-04
RADIUS server failure, configuring 40-40
rate limiting 40-13
returning to default values 40-22
setting automatic reauthentication 40-17
setting idle time 40-19
setting reauthentication manually 40-18
setting retransmission number 40-21
supplicant
automatic reauthentication
40-17
manual reauthentication 40-18
support for DHCP relay agent 40-8
support for guest VLANs 40-9
transport layer packets
setting retransmission time
40-21
using a RADIUS server for VLAN assignment 40-7
with ARP traffic inspection 40-11
with auxiliary VLANs 40-8
with port security 40-10
802.1x authentication
manual reauthentication
40-18
802.3ah Ethernet OAM, configuring 20-26
8-port T1/E1 PSTN interface module
configuring
55-27
description 55-6
A
abbreviating commands 2-9
Accelerated Server Load Balancing
See ASLB
access control entries
See IOS ACLs
See QoS ACE
See VACLs
access control lists
See IOS ACLs
See QoS ACL
See VACLs
access control subsystem
SNMP entity
46-7
accessing the MSFC
console port
2-3
Telnet session 2-4
accounting
configuration guidelines
39-55
creating accounting records 39-53
default configuration 39-55
disabling 39-57
enabling 39-56
events 39-52
example configuration 39-58
overview 39-52
specifying RADIUS servers 39-53
suppressing accounting 39-54
updating the server 39-54
ACE
See IOS ACLs
See QoS ACE
See VACLs
ACL
See IOS ACLs
See QoS ACL
See VACLs
ACL compiler optimization, enabling
15-82
ACLs, downloadable 15-116
ACL statistics, clearing 15-85
ACL statistics, displaying 15-86
ACL statistics on a per-ACE basis, enabling 15-84
ACL statistics on a per-ACL basis, enabling 15-83
ACL statistics on a per-VLAN basis, enabling 15-84
acronyms, list of A-1
adding hosts 40-24
addresses
IP, see IP addresses
MAC, see MAC addresses
Address Recognition Protocol
See ARP table
address resolution protocol