Cisco WS-C6506 - Page 1479

Index
IN-31
Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7
OL-8978-04
preparing for 27-23
downloading using SFTP 27-26
upgrading EPLD images 27-2
uploading
preparation
27-15, 27-22
rcp server 27-22, 27-26
supervisor engine 27-15, 27-22, 27-26
uploading using SCP
preparing for
27-25
uploading using SFTP 27-27
verifying 27-35
source-destination-ip flow mask 13-12, 14-6
source-destination-vlan flow mask 13-12, 14-6
SPAN
caution
48-8
configuration guidelines 48-7
configuring from CLI 48-8
destination port 48-2
disabling 48-9, 48-14
egress 48-3
hardware requirements 48-6
ingress 48-3
NMS and 48-1
overview 48-6
session 48-2
session limits 48-5
session limits table 48-6
source port 48-2
traffic 48-4
spanning tree
warnings, executing
20-23
Spanning Tree Protocol
See STP
speed
10/100 Ethernet port, setting
4-6
SRM
configuration guidelines
23-44
configuring on Supervisor Engine 1 and Supervisor
Engine 2
23-45
configuring on Supervisor Engine 720 23-45
getting out of SRM 23-49
hardware and software requirements 23-43
upgrading images with SRM enabled 23-48
SRR 51-66
SSH 20-12
SSH keyboard interactive 20-13
SST 7-16, 7-17
interoperability 7-19
standby supervisor engine
See redundant supervisor engine
See supervisor engine, redundant
startup tasks
booting from Melody Compact Flash
3-5
booting the MSFC 3-4
static routes
CIDR and
22-8
configuring 22-8
VLSM and 22-8
statistics
BPDU skewing
7-59
bridged flow 16-3
statistics, PFC2 13-11
STP
BPDUs and
7-3
bridge ID priority, understanding 7-15
forward delay timer 7-49
hello time 7-49
IEEE, overview 7-2
MAC address allocation 7-14
MAC address reduction 7-15
enabling 11-7
maximum age timer 7-49
port states 7-6
See also BackboneFast
See also MISTP and PVST+
See also PortFast
See also UplinkFast
timers