Index
IN-37
Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7
OL-8978-04
configuration guidelines 15-45
configuring 15-44
configuring counters 15-81
configuring for policy-based forwarding 15-90
configuring on private VLANs 15-43
denying access to a server on another VLAN
procedure
15-29
features unsupported 15-44
hardware requirements 15-2
inspecting ARP traffic 15-30
Layer 2 parameters 15-5
Layer 3 parameters 15-5
Layer 4 parameters 15-5
Layer 4 port operations 15-23
logging messages 15-59
overview 15-2
redirecting broadcast traffic to a specific server port
figure
15-27
procedure 15-27
restricting ARP traffic 15-29
restricting the DHCP response for a specific server
figure
15-28
procedure 15-28
storing in Flash memory 15-64
supported features 15-5
types and ACE parameters 15-5
types and parameters 15-5
with IOS ACLs 15-17
virtual LAN
See VLANs
VLAN Access Control Lists
See VACLs
VLAN-based SPAN
See VSPAN
VLAN filtering
trunk
48-4
VLAN Management Policy Server
See VMPS
VLAN mapping
11-14
VLANs
allowed on trunk
5-8
auxiliary 55-8, 55-20
configuring for use with the Firewall Services
Module
11-37
configuring VLAN mapping 11-14
default configuration 11-3
deleting 11-13
designating on command-line 2-5
Ethernet 11-5
extended range 11-2, 11-6
FDDI 11-30
in-band (sc0) interface assignment 11-2
internet
assigning ports to
11-10
mapping 802.1Q to ISL 11-9
ports, assigning to 11-10
IP subnetworks and 11-2
mapping 802.1Q to ISL 11-9
MISTP VLAN conflicts
See MISTP
native
802.1Q and
5-4
normal range 11-2, 11-5
port provisioning verification 11-12
private
See private VLANs
protocol filtering and
36-1
reserved range 11-2
sc0 (in-band) interface assignment 11-2
Token Ring 11-31
trunks
See trunks
VTP domain and
11-1
VLAN Trunking Protocol
See VTP
VLSM
static routes and
22-8
VMPS
To Next Page
Loading...
