Contents
xxii
Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7
OL-8978-04
Preparing to Download an Image Using SCP 27-23
Downloading the Crypto Images Using SCP 27-23
Example SCP Download Procedure 27-24
Uploading the Crypto Images to an SCP Server 27-25
Preparing to Upload an Image to an SCP Server 27-25
Uploading the Crypto Images to an SCP Server 27-26
Downloading the Crypto Images Using SFTP 27-26
Uploading the Crypto Images to an SFTP Server 27-27
Downloading the Software Images Over a Serial Connection on the Console Port 27-28
Preparing to Download an Image Using Kermit 27-28
Downloading the Software Images Using Kermit (PC Procedure) 27-29
Downloading the Software Images Using Kermit (UNIX Procedure) 27-30
Example Serial Software Image Download Procedures 27-31
Downloading a System Image Using Xmodem or Ymodem 27-33
Verifying the Software Images 27-35
CHAPTER
28 Working with Configuration Files 28-1
Working with the Configuration Files on the Switch 28-1
Creating and Using Configuration File Guidelines 28-2
Creating a Configuration File 28-2
Downloading the Configuration Files to the Switch Using TFTP 28-3
Uploading the Configuration Files to a TFTP Server 28-5
Copying the Configuration Files Using SCP or rcp 28-6
Downloading the Configuration Files from an rcp or SCP Server 28-7
Uploading Configuration Files to an rcp or SCP Server 28-8
Clearing the Configuration 28-9
Comparing the Configuration Files 28-10
Creating the Configuration Checkpoint Files for Configuration Rollback 28-11
Working with the Configuration Files on the MSFC 28-12
Uploading the Configuration File to a TFTP Server 28-13
Uploading the Configuration File to the Supervisor Engine Flash PC Card 28-14
Downloading the Configuration File from a Remote Host 28-14
Downloading the Configuration File from the Supervisor Engine Flash PC Card 28-16
Working with Profile Files 28-16
Building Profile Files 28-16
CHAPTER
29 Configuring System Message Logging 29-1
Understanding How the System Message Logging Works 29-1