25-13
Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7
OL-8978-04
Chapter 25 Modifying the Switch Boot Configuration
Displaying the Switch Boot Configuration
This example shows how to display the current configuration register, the BOOT environment variable,
and the CONFIG_FILE environment variable settings:
Console> (enable) show boot
BOOT variable = bootflash:cat6000-sup.5-2-1.bin,1;
CONFIG_FILE variable = bootflash:generic.cfg;bootflash:6509_1_noc.cfg
Configuration register is 0x12f
ignore-config: disabled
auto-config: recurring
console baud: 9600
boot: image specified by the boot system commands
Console> (enable)
To Next Page
Loading...
