Citizen CT-S280 - Page 218

- 217 -
• Setting MSW 5 (a=5)
n b (Set Value) Function
1 48 (Default) Reserved
2 48 (Default) Reserved
48 USB mode virtual serial.
3
49 (Default) USB mode printer class.
4 48 (Default) Reserved
5 48 (Default) Reserved
48 (Default) Faster printing mode
6
49 Higher quality printing mode
7 48 (Default) Reserved
8 48 (Default) Reserved
• Setting MSW11 (a=11)
n b (Set Value) Function
48 Presenter function disabled
1
49 Presenter function enabled
48 (Default) Retract function disabled
2
49 Retract function enabled
48 (Default) Retract direction = Rear
3
49 Retract direction = Front
48 Store and eject = disabled
4
49 (Default) Store and eject = enabled
48 No print with paper = disabled
5
49 (Default) No print with paper = enabled
48 (Default) Minimum receipt length = 75mm
6
49 Minimum receipt length = 120mm
7 48 (Default) Reserved
8 48 (Default) Reserved
• Setting MSW12 (a=12)
n b (Set Value) Function
48 Bezel function disabled
1
49 Bezel function enabled
48 LED control disabled
2
49 (Default) LED control enabled
3 48 (Default) Reserved
4 48 (Default) Reserved
48 (Default) Show Error by LED = disabled
5
49 Show Error by LED = enabled
48 No print with paper = disabled
6
49 (Default) No print with paper = enabled
7 48 (Default) Reserved
8 48 (Default) Reserved