- 222 -
[Outline] [The specification which is commontothemodel]
•Sets thecustomized value set in “a”to(nL+nH×256).
a Function
1 Specifies user NV memorycapacity.
2 Specifies thememorycapacityof NV graphics.
3
Selects paper width.
5
Selects printing density.
6
Selects printing speed.
97 Sets thenumber ofdivisions forconducting head
116
Selects printing color.
130 Sets the auto retraction time length
131 Sets the time length of bezel LED ON at waiting
132 Sets the time length of bezel LED ON at blinking
133 Sets the time length of bezel LED OFF at blinking
134 Sets the state of bezel LED at waiting
135 Sets the state of bezel LED at printing
136 Sets the state of bezel LED at ejecting
201
Sets ACK output position(onlyparallel I/F).
202
Selects inputbuffer fullBusyoutput/canceltiming (idle capacity).
212 Selects DMA(DirectMemoryAccess) control ofserial communication.
213 Selects the flow controlwhen virtual COMis set.
214 Select theenable/disable ofKanji.
216 Selects JIS / Shift JIS
217 Selects the international character set
218 Selects the codepage
220 Sets the maximum BM width.
221 Sets the maximum BM page length.
222 Adjusts the distance of BM header.
223 Adjusts the distance of BM footer.
224 Adjusts the length of BM cut distance.
225 Adjusts the length of BM head distance.
226 Sets the wait time for manual cut
230 Selects the language of LCD message
231 Selects the enable/disable of LCD download message
232 Selects the LCD auto Off time
233 Selects the enable/disable of key lock
234 Selects the direction of LCD message
240 Sets the buzzer volume
241 Sets the max dot number for one head division
242 Sets the max dot number for Powered USB
243 Select the mechanism type
[Caution] [The specification which is commontothemodel]
•Thisfunction operates onlyin printer function setting mode.
•The value changed bythiscommandisenabledbyexecutionoffunction2 (fn= 2: Endof printerfunction
setting mode) (Recommended)
To Next Page
Loading...
