- 223 -
CT-S280
• a=5: Sets printing density to the level specified by (nL+nH×256).
(nL+nH×256) Printing Density
65530 70%
65531 75%
65532 80%
65533 85%
65534 90%
65535 95%
0(Default) 100%
1 105%
2 110%
3 115%
4 120%
5 125%
6 130%
7 135%
8 140%
• a=6: Sets printing speed to the value specified by (nL+nH×256).
(nL+nH×256) Printing Speed
1
Printing speed level 1 (84%)
2
Printing speed level 2 (86%)
3
Printing speed level 3 (88%)
4
Printing speed level 4 (90%)
5
Printing speed level 5 (92%)
6
Printing speed level 6 (94%)
7
Printing speed level 7 (96%)
8
Printing speed level 8 (98%)
9 (Default)
Printing speed level 9 (100%)
• a=116: Sets the paper specified by (nL+nH×256).
(nL+nH×256) Paper
1 (Default) Specified single color paper.
257 Recommended 2-color paper5
• a=201: Outputs ACK to the position specified by (nL+nH×256).
(nL+nH×256) ACK Output Position
1 (Default) ACK-in-Busy
2 ACK-while-Busy
3 ACK-after-Busy
• a=202: Controls input buffer full Busy with the value selected by
(nL+nH×256) and controls Busy with output/cancel timing
(remaining capacity).
When Input Buffer
Capacity “Small” is Set
When Input Buffer
Capacity 4K Bytes
(Large) is Set
(nL+nH×256)
Output Cancel Output Cancel
1 (Default) 16 26 128 256
2 16 40 128 512
3 30 50 72 256
4 30 60 72 512
• XON/XOFF is also output by the establishment of conditions.
• Ignores the data received when input buffer idle capacity is 0.
To Next Page
Loading...
