- 232 -
CT-S310II
• a=202: Controls input buffer full Busy with the value selected by
(nL+nH×256) and controls Busy with output/cancel timing
(remaining capacity).
When Input Buffer
Capacity “Small” is Set
When Input Buffer
Capacity 4K Bytes
(Large) is Set
(nL+nH×256)
Output Cancel Output Cancel
1 16 26 128 256
2 16 40 128 512
3 30 50 72 256
4 30 60 72 512
• XON/XOFF is also output by the establishment of conditions.
• Ignores the data received when input buffer idle capacity is 0.
• a=212: Selects DMA (Direct Memory Access) control of serial
communication specified by (nL+nH×256).
(nL+nH×256) DMA control
1 Invalid
2(Default) Valid
• a=213: Selects the flow control specified by (nL+nH×256) when virtual
COM is set.
(nL+nH×256) Flow control
1(Default) PC setting
2 DTR/DSR
3 XON/XOFF
• a=214: Select the enable/disable of Kanji specified by (nL+nH×256)
(nL+nH×256) Kanji
1 Invalid(OFF)
2(Default) Valid(ON)
• a=216: Select the JIS/Shift JIS specified by (nL+nH×256)
(nL+nH×256) JIS/Shift JIS
1(Default) JIS
2 Shift JIS(CP932)
3 Shift JIS(X0213)
• a=217: Select the international character set specified by (nL+nH×256)
(nL＋nH×256) Int’l Char set (nL＋nH×256) Int’l Char set
1(Default) U.S.A. 9 Japan
2 France 10 Norway
3 Germany 11 Denmark II
4 U.K. 12 Spain II
5 Denmark I 13 Latin America
6 Sweden 14 Korea
7 Italy 15 Croatia
8 Spain I 16 P.R. China
• a=218: Select the codepage specified by (nL+nH×256)
(nL＋nH×256) Codepage (nL＋nH×256) Codepage
1 Codepage PC437 8 Codepage PC866
2 Katakana 9 Codepage PC857
3 Codepage PC850 10 WPC1252
4 Codepage PC860 11 Space page
5 Codepage PC863 12 Codepage PC864
6 Codepage PC865 13 Thai code18
7 Codepage PC852
To Next Page
Loading...
