- 233 -
CT-S401
・a=244: Selects the top margin specified by (nL＋nH×256)
(Small top margin = long back feed at printing start）
(nL+nH×256)
Top margin
1(Default)
11mm (No back feed)
2 3mm (8mm back feed)
3 4mm (7mm back feed)
4 5mm (6mm back feed)
5 6mm (5mm back feed)
6 7mm (4mm back feed)
7 8mm (3mm back feed)
8 9mm (2mm back feed)
9 10mm (1mm back feed)
・a=245: Selects the line gap reduction ratio specified by (nL＋nH×256)
(nL+nH×256)
Rudction ratio of line gap
1(Default)
No reduction
2 Reduction to 3/4
3 Reduction to 2/3
4 Reduction to 1/2
5 Reduction to 1/3
6 Reduction to 1/4
7 Reduction to 1/5
8 No line gap
・a =246: Selects the mode to print compressed character specified by
(nL＋nH×256)
(nL+nH×256)
Character size
compression ratio
Vertical/Horizontal
1(Default)
100% / 100%
(No compression)
2 75% / 100%
3 50% / 100%
4 100% / 75%
5 75% / 75%
6 50% / 75%
・a=247: Select the number of dot for auto side shift specified by
(nL＋nH×256)
(nL+nH×256)
Auto Side Shift
1(Default)
Invalid
2 1dot
3 2dot
4 3dot
5 4dot
6 5dot
7 6dot
8 7dot
・a=248： Selects the event for the buzzer activation specified by
(nL＋nH×256)
(nL+nH×256)
Buzzer enent
1
All events / errors
2(Default) Except cover open
3 Except cover open / no paper
To Next Page
Loading...
