Citizen CT-S280 - Page 417

- 416 -
●MSW4-2： Auto Loading (Only for PMU series)
[Outline] Set the enabled/disabled of paper auto loading function.
OFF(0) ON(1)
Auto Loading
Invalid Valid
ON(1) OPERATION: Auto Loading is used.
OFF (0) OPERATION:Auto Loading is not used.
●MSW4-3: Paper feed & cut atclosing cover
[Outline] Whencover isclosed, printerfeedspaperandcuts.
OFF(0) ON(1)
Feed&Cut at TOF Invalid Valid
ON(1) OPERATION: Paper feed &cut atclosing coveris enabled.
OFF (0) OPERATION:Paperfeed& cutatclosing coveris disabled.
●MSW4-4: Paper
[Outline] Selects the type of paper used.
OFF(0) ON(1)
Paper Thermal rollpaper Blackmarkpaper/Labelpaper
ON(1) OPERATION: Paper used is limited to black mark paper or label paper.
OFF (0) OPERATION:Paper used is limited to thermal roll paper.
●MSW4-4： Base style (Only for PMU2XXX/PMU2XXXII)
[Outline] Set the base style
OFF(0) ON(1)
Base style
PMU2XX0/2XX2 PMU2XX1
ON(1) OPERATION: PMU2XX1 (Vertical style with front paperholding)
OFF (0) OPERATION: PMU2XX0/2XX2(Horizontal style or Vertical style with back paper holding)