Citizen CT-S280 - Page 419

- 418 -
●MSW4-7: Auto paper Select (CT-S281 unique)
[Outline] Selects Valid/Invalid ofpaper type auto select function.
OFF(0) ON(1)
Auto Paper Select Invalid Valid
ON(1) OPERATION: Paper type auto selection functionis valid
OFF (0) OPERATION: Paper type auto selection functionis invalid
** Paper type auto select function determines the used paper type and sets the paper type automatically
depending on the result of auto length measurement or finding black mark or top of label at power on/cover
close,
**Valid onlyif Black mark/Label isselectedat MSW4-4
**IfMSW4-1issetforautolengthmeasurementorMSW4-2issettofindTOF,thisfunctionworksatpoweron.
**If theprinteristurned off with receipt mode set by thisfunction, the printer goesback to labelmode.
●MSW4-7: DC3 command function switch (CT-S280 unique)
[Outline] Select the operationtakenwhen DC3 commandis received.
OFF(0) ON(1)
DC3command function 2 color printing B/Wreverse
ON(1))OPERATION:WhenDC3command isreceived,black/white reverse printingmode isset /cleared.
OFF(0) OPERATION:WhenDC3command isreceived,2 color printing mode isset/ cleared.
●MSW4-8: Forcible partial cut
[Outline] Select theoperationtakenwhen full cut command is received.
OFF(0) ON(1)
Partialonly Invalid Valid
ON(1) OPERATION: Whenfull cutcommand isreceived,partial cut,not fullcut,is taken.
OFF (0) OPERATION:Whenfull cutcommand isreceived,full cut istaken.