Cleverscope CS300 - Page 37

v2.13 Cleverscope CS300 Reference Manual
©Cleverscope 2004-2018 www.cleverscope.com Page 37
The button is shown on the right of the Trigger button.
Toggling this disables and enables the automatic save.
Save on Duration elapsed
Click on this option to save a file every Auto save duration (seconds) following a
trigger.
The button is shown on the right of the Single button.
Toggling this disables and enables the automatic save.
Save following Open
Click on this option to save automatically after any file is opened and after any
processing, including maths.
Note: This is particularly useful for post-processing logged files.
Save As file format
Click on the up or down arrow or in the field to select from the dropdown list.
Options are : Cleverscope (.apc), Text (.txt), Binary (.bin),
Save File Base Name
Click on the up or down arrow or in the field to select the file
Note: For all automatic saves a base file name must be specified in Save File Base
Name and the file increment is controlled with Save start and Save stop. Save start
is automatically incremented with each save
Save start and Save stop
Click on the up or down arrow or in the field to define the file increments