D-Link DWC-1000 - Page 53

D-Link DWC-1000 User Manual 53
Section 3 - Basic Conguration
4. Select an Interface for the guest captive portal.
a. Click Wireless > Access Point > SSID Proles. The SSID Prole List page will appear.
b. Under the SSID column, right click the selected SSID that will use the Captive Portal function and
click Edit.
c. Select a Captive Portal Type from the drop-down menu.
d. Click Save.
Note: Apply AP Prole from Wireless > Access Point > AP Proles if the SSID have been associated with
a used AP Prole to change the conguration.
5. Generate guest accounts.
a. Log in the Front Desk page by entering http://<ip_address>/frontdesk (e.g., http://192.168.10.1/
frontdesk). Enter the username and password of the user you created in a “Front Desk” group.
b. This will open a billing desk page as shown in the gure below. Modify the usage if you want. Click
Generate.