dallmeier DLS 4 Installation And Configuration

DLS 4 / DLS 8 / 8 PLUS / DLS 16 / 16 PLUS
36Dallmeier electronic
The Dialog Selection for Setup Assistant Mode dialog will be displayed.
Fig. 7-20: Dialog Selection for Setup Assistent Mode
Ø Activate Assistant Mode for the group(s) (A) by checking the appropriate checkbox.
Ø Dene the relevant setup dialogs for the user group by checking the appropriate check-
box.
NOTE
Please note that a user group must by authorized to congure
the relevant setup dialogs (see User management).
Ø Finally conrm with OK.
7.4.8 Recording timeout
The Recording Timeout function can be used to monitor the recording of cameras / tracks
with Motion Detection or Contact recording mode.
The function assumes an error (e. g. unsuitable conguration of motion detection or faulty
contact sensor) if no recording had been triggered in a dened period. This error can trigger
displaying of a System Message and / or sending of a Alarm Host message.
Note that an error will not be assumed when a monitored recoding has been stopped in the
Recording Settings dialog.
Ø Open the conguration dialog via Setup > System > Options > Recording Timeout.
Fig. 7-21
A

dallmeier DLS 4 Specifications

General

Brand	dallmeier
Model	DLS 4
Category	Measuring Instruments
Language	English