dallmeier DLS 4 Installation And Configuration

DLS 4 / DLS 8 / 8 PLUS / DLS 16 / 16 PLUS
42Dallmeier electronic
8.1.1 Standard
In the Standard track mode every camera / track is assigned a particular part of the entire
video memory manually (track size). Thereby static tracks will be dened. When the size
of one track is modied the recordings in all tracks have to be deleted.
Fig. 8-2: Track mode Standard
8.1.1.1 Recording
The recordings will be saved into the corresponding track continuously. The oldest image
will be overwritten, when the memory is used up (ring memory).
8.1.1.2 Modications
The size of the tracks can be modied. In this case all recordings in all tracks have to be
deleted.
Tracks can be dropped and new tracks can be created. In this case all recordings in all
tracks have to be deleted.
The video quality settings can be modied. In this case normally the recordings in the
corresponding track have to be deleted.
8.1.1.3 Track types
Longplay tracks
LP tracks are generally large ring memories. They are used for ongoing recording. One LP
track is available for each camera.
Secure tracks
Secure tracks are generally relatively small ring memories. One S track can be assigned to
each camera. Different recording modes can be dened for the LP track and the S tracks.
In certain circumstances (for example if the recording is stopped, the alarm status is activated
or other Contact IN functions), the secure tracks will be saved. This ensures that current
images cannot be overwritten. The recording is then continued in a new secure track.

dallmeier DLS 4 Specifications

General

Brand	dallmeier
Model	DLS 4
Category	Measuring Instruments
Language	English