DLS 4 / DLS 8 / 8 PLUS / DLS 16 / 16 PLUS
43Dallmeier electronic
Saved tracks
Secure tracks that have been protected before being overwritten are known as saved tracks.
Several saved tracks may exist for each camera.
Reference track
Only individual camera images are saved in the reference track. These can be used to
compare the current camera settings and positions with the original situation. Reference
tracks are therefore not used for recording purposes and neither can they be played back
(see documentation Operation).
8.1.1.4 Recording modes
The following recording modes can be used in the Standard track mode:
l Permanent
l Motion
l Contact
8.1.2 Manual
In the manual track mode the entire video memory will be segmented into memory units
automatically. Every camera / track is assigned a particular number of the memory units
manually (track size). Thereby static tracks will be dened. The size of the tracks can be
modied anytime without the need to delete recordings.
Fig. 8-3: Track mode manual
8.1.2.1 Recording
The recordings will be saved into a memory unit of the corresponding track continuously.
When the memory unit is lled, the track’s next empty memory unit will be used.
When no empty memory unit of the track is available, the track’s oldest memory unit will be
deleted and used for the current recording.
To Next Page
Loading...
Need help?
General
