DLS 4 / DLS 8 / 8 PLUS / DLS 16 / 16 PLUS
45Dallmeier electronic
8.1.3.1 Recording
The recordings will be saved into a memory unit of the corresponding track continuously.
When the memory unit is lled the track will be assigned the next empty memory unit. It will
then be used for the current recording.
If no empty memory unit is available, the oldest memory unit of all tracks will be searched.
Decisive is the timestamp of the last recorded image in the unit. This (oldest) memory unit
will be deleted and assigned to the corresponding track. It will then be used for the current
recording.
8.1.3.2 Modications
The size of the tracks can not be modied manually. It will be adopted automatically. No
recordings have to be deleted.
Tracks can be dropped and new tracks can be created, without deleting other tracks or
recordings.
The video quality settings can be modied anytime. The recordings in the corresponding
track do not have to be deleted.
8.1.3.3 Track types
One LP track (see above) is dened automatically as a ring memory for each camera.
One reference track (see above) is available independent from the recording settings.
8.1.3.4 Recording modes
The following recording modes can be used in the automatic track mode:
l Permanent
l Motion
l Contact
8.1.4 Change
The track mode should be set before the recording conguration. In principle it can be
changed anytime, whereat all recordings have to be deleted.
IMPORTANT
When changing the track mode all recordings and various set-
tings (e. g. video quality, camera timer) have to be deleted.
To Next Page
Loading...
Need help?
General
