IMAGE SAVING
PRODUCT REFERENCE GUIDE
163
Password
Click to activate the “The Text Entry Tool” on page 81 and enter the password required to
access the server.
Passive Mode
Click the checkbox to enable Passive Mode.
File Transfer Timeout
Enter an amount of time in seconds within which the transfer of the image will timeout.
Destination Directory
Enter the complete path of the destination directory.
Server Settings External Viewer
Destination IP Address
Enter the IP Address of the External Viewer destination
Server Settings On Camera
Port Number
Enter the number of the port On Camera to receive images.
Directory Splitting
Enable
Select the check box to enable directory splitting. Enabling this parameter causes the
destination directory to be split into subdirectories containing a number of images not greater
than the defined Split Destination Max File Number (see below). The subdirectories of the
Saving Path are numbered consecutively: 1, 2, 3, etc.
Max Number of Files per Directory
Enter the number of files allowed in each subdirectory.
Destination Directory Maintenance
Click the check box to enable directory maintenance. The following parameters are revealed
Max Number of Files
Enter the maximum number of image files to maintain on the camera.
Max Total Size
Enter the size in mega bytes to allow for on camera image storage.
Max File Age
Enter the age in seconds of images to save.
3. When you have finished making changes, click Update to save or click Reset to
revert to the previously saved values.
To Next Page
Loading...
Need help?
General
