TRIGGER AND FOCUSING DEVICE MOUNTING
PRODUCT REFERENCE GUIDE
45
TRIGGER AND FOCUSING DEVICE MOUNTING
When required, an external device can be used to measure the position of parcels as
they enter the field of view of the AV500/AV900 Camera. This information can be used
by the camera to determine the correct position for optimal focusing. Proper mounting
of these devices is critical to accurately determining the parcel positions. The Datalogic
focusing devices may be one of the following:
• AS1AreaScan
• DK503 - S-85 Position Sensor Kit
• DM3610 Dimensioner
• LCC 75XX Light Curtain
• S-60 Photocell
Follow the instructions for correct mounting and positioning of the focusing devices
fou
nd in each devices reference manual.
Software setup of these devices is explained in “Trigger, Positioning and Focusing Device
Setup” on page 270.
To Next Page
Loading...
Need help?
General
