Dell Force10 C150 - Page 1024

1024 | Stacking S-Series Switches
www.dell.com | support.dell.com
Figure 50-5. Adding a Standalone with a Lower MAC Address but Higher Priority to a Stack—
Before
-------------------------------STANDALONE BEFORE CONNECTION----------------------------------
Standalone#show system brief
Stack MAC : 00:01:e8:d5:ef:81
-- Stack Info --
Unit UnitType Status ReqTyp CurTyp Version Ports
---------------------------------------------------------------------------
0 Member not present S50V
1 Member not present S50N
2 Management online S50V S50V 7.8.1.0 52
3 Member not present
4 Member not present
5 Member not present
6 Member not present
7 Member not present
[output omitted]
Stack#show system | grep priority
Master priority : 1
------------------------------------STACK BEFORE CONNECTION----------------------------------
Stack##show system brief
Stack MAC : 00:01:e8:d5:f9:6f
-- Stack Info --
Unit UnitType Status ReqTyp CurTyp Version Ports
---------------------------------------------------------------------------
0 Standby online S50V S50V 7.8.1.0 52
1 Management online S50N S50N 7.8.1.0 52
2 Member not present
3 Member not present
4 Member not present
5 Member not present
6 Member not present
7 Member not present
Stack#show system stack-unit 0 | grep priority
Master priority : 0
Stack#show system stack-unit 1 | grep priority
Master priority : 0