Dell Force10 C150 Configuration Guide

416 | Interfaces
www.dell.com | support.dell.com
Interface Types
View Basic Interface Information
The user has several options for viewing interface status and configuration parameters. The show
interfaces
command in EXEC mode will list all configurable interfaces on the chassis and has options to
display the interface status, IP and MAC addresses, and multiple counters for the amount and type of
traffic passing through the interface. If a port channel interface is configured, the
show interfaces
command can list the interfaces configured in the port channel.
Figure 20-1 displays the configuration and status information for one interface.
Interface Type
Modes
Possible Default Mode
Requires
Creation Default State
Physical L2, L3 Unset No Shutdown (disabled)
Management N/A N/A No No Shutdown (enabled)
Loopback L3 L3 Yes No Shutdown (enabled)
Null N/A N/A No Enabled
Port Channel L2, L3 L3 Yes Shutdown (disabled)
VLAN L2, L3 L2 Yes (except
default)
L2 - No Shutdown (enabled)
L3 - Shutdown (disabled)
Note: To end output from the system, such as the output from the show interfaces command, enter
CTRL+C and FTOS will return to the command prompt.
Note: Unicast counters in the show interface output will increment when the interface receives multicast or
broadcast packets.

Dell Force10 C150 Specifications

General

Brand	Dell
Model	Force10 C150
Category	Server
Language	English