Dell Force10 C150 - FTSA Message Types

Force10 Service Agent | 355
FTSA Message Types
FTOS displays Message 2 every time FTSA sends a message.
FTSA generates Type 0 messages when you enable a recipient.
Figure 16-3. FTSA Type 0 Message
FTSA generates Type 1 messages when messaging is disabled. Messaging is disabled when:
• you
no-enable a recipient or no enable-all
• messaging is enabled and you no call-home
Figure 16-4. FTSA Type 1 Message
FTSA generates Type 2 messages for a force or auto failover.
All E-mails are generated in XML format by
default. For Type 5 messages only, you may
generate E-mails in clear text format. The
configuration is per action list.
message-format {xml | text} CALLHOME ACTIONLIST
FTOS Behavior: FTOS versions prior to 8.2.1.0 diverted Type 5 messages to the internal flash root
directory when you enter the command log-only. Beginning in version 8.2.1.0, FTOS stores these
messages in /CALL-HOME-LOGs on the internal flash.
Message 2 FTSA Message Sent
%RPM0-P:CP %CALL-HOME-HELPER-3-CALLHOME: Callhome service sent a message to Force10 at
pubslab@training10.com
Task Command Command Mode
<AgentInfo>
<messagetype>Type - 0</messagetype>
<time>16:25:08.887 UTC Tue Feb 17 2009</time>
<serialnum>0026233 </serialnum>
<hostname>R1_E600</hostname>
<messagenum>0</messagenum>
</AgentInfo>
<AgentInfo>
<messagetype>Type - 1</messagetype>
<time>19:49:51.581 UTC Wed Feb 18 2009</time>
<serialnum>0036232 </serialnum>
<hostname>Force10</hostname>
<messagenum>0</messagenum>
</AgentInfo>