Dell Force10 C150 - Display the Logging Buffer and the Logging Configuration

64 | System Management
www.dell.com | support.dell.com
Display the logging buffer and configuration using the show logging command from EXEC Privilege
mode, as shown in Figure 4-2.
Display the logging configuration using the
show running-config logging command from EXEC
Privilege mode, as shown in Figure 4-3.
Display the Logging Buffer and the Logging Configuration
Display the current contents of the logging buffer and the logging settings for the system using the show
logging
command from EXEC Privilege mode, as shown in Figure 4-2.
Task Command Syntax Command Mode
Specify the size of the logging buffer.
Note: When you decrease the buffer size, FTOS deletes
all messages stored in the buffer. Increasing the buffer
size does not affect messages in the buffer.
logging buffered size CONFIGURATION
Specify the number of messages that FTOS saves to its
logging history table.
logging history size size
CONFIGURATION