Dell Force10 C150 - Display Link Layer OAM Configuration and Statistics

104 | 802.3ah
www.dell.com | support.dell.com
Display Link Layer OAM Configuration and Statistics
Task Command Syntax Command Mode
Display Link Layer OAM status per
interface.
show ethernet oam status interface interface
EXEC Privilege
FTOS# show ethernet oam status interface <interface-name>
Output Format :
<interface-name>
General
______
Mode:active
PDU max rate:10 packets per second
PDU min rate:1 packet per second
Link timeout:5 seconds
High threshold action:no action
Link Monitoring
____________
Status supported (on)
Symbol Period Error
Window:1 million symbols
Low threshold:1 error symbol(s)
High threshold:none
Frame Error
Window:1 million symbols
Low threshold:1 error symbol(s)
High threshold:none
Frame Period Error
Window:1 x 100,000 frames
Low threshold:1 error symbol(s)
High threshold:none
Frame Seconds Error
Window:600 x 100 milliseconds
Low threshold:1 error second(s)
High threshold:none
Display Link Layer OAM statistics per
interface.
show ethernet oam statistics interface interface
EXEC Privilege