C-Series Debugging and Diagnostics | 1183
Hardware watchdog timer
The hardware watchdog command automatically reboots an FTOS switch/router with a single
RPM that is unresponsive. This is a last resort mechanism intended to prevent a manual power
cycle.
.1.3.6.1.4.1.6027.3.1.1.2.1.1.2 chSysPowerSupplyOperStatus Each entry in the chSysPowerSupplyTable includes
a set of objects which describe the status of a
particular power supply.
.1.3.6.1.4.1.6027.3.1.1.4.0.13 chAlarmPowerSupplyDown Trap generated when the power supply status
changes to non-operational
.1.3.6.1.4.1.6027.3.1.1.4.0.17 chAlarmPowerSupplyClear Trap generated when the power supply status
changes to operational.
.1.3.6.1.4.1.6027.3.1.1.4.0.32 chAlarmMajorPS Trap generated when a power supply major alarm is
issued
.1.3.6.1.4.1.6027.3.1.1.4.0.33 chAlarmMajorPSClr Trap generated when a power supply major alarm is
cleared
.1.3.6.1.4.1.6027.3.1.1.4.0.34 chAlarmMinorPS Trap generated when a power supply minor alarm is
issued
.1.3.6.1.4.1.6027.3.1.1.4.0.35 chAlarmMinorPSClr Trap generated when a power supply minor alarm is
cleared
Fan Tray
.1.3.6.1.4.1.6027.3.1.1.2.2.1.2 chSysFanTrayOperStatus Each entry in the chSysFanTrayTable includes a set
of objects that describe the status of a particular fan
tray, as identified by the chSysFanTrayIndex
.1.3.6.1.4.1.6027.3.1.1.4.0.36 chAlarmMinorFanBad Trap generated when the status of one or more fans
changes to down, and generates a minor alarm
.1.3.6.1.4.1.6027.3.1.1.4.0.21 chAlarmMinorFanBadClear Trap generated when the minor alarm on the one or
more fans is cleared
.1.3.6.1.4.1.6027.3.1.1.4.0.16 chAlarmFanTrayDown Trap generated when all fans are down and/or when
the fan tray status changes to missing or down
.1.3.6.1.4.1.6027.3.1.1.4.0.20 chAlarmFanTrayClear Trap generated when all fans and/or the fan tray
status changes to operational
Command Description
hardware watchdog Enable the hardware watchdog mechanism.
Table 60-4. SNMP Traps and OIDs
OID String OID Name Description
To Next Page
Loading...
