Dell Force10 C150 - Configuring a Lag on Alpha

550 | Link Aggregation Control Protocol
www.dell.com | support.dell.com
Figure 24-11. LACP Sample Topology
Configuring a LAG on ALPHA
Figure 24-12. Creating a LAG on ALPHA
Gig 2/31
Gig 3/21
Gig 2/32
Gig 3/22
Gig 2/33
Gig 3/23
Port Channel 10
ALPHA
BRAVO
Alpha(conf)#interface port-channel 10
Alpha(conf-if-po-10)#no ip address
Alpha(conf-if-po-10)#switchport
Alpha(conf-if-po-10)#no shutdown
Alpha(conf-if-po-10)#show config
!
interface Port-channel 10
no ip address
switchport
no shutdown
!
Alpha(conf-if-po-10)#