Dell Force10 C150 - Page 1244

1244 | Standards Compliance
www.dell.com | support.dell.com
Intermediate System to Intermediate System (IS-IS)
FTOS support, per platform
RFC# Full Name S-Series C-Series
E-Series
TeraScale
E-Series
ExaScale
1142 OSI IS-IS Intra-Domain Routing Protocol (ISO DP 10589)  8.1.1
1195 Use of OSI IS-IS for Routing in TCP/IP and Dual
Environments
 8.1.1
2763 Dynamic Hostname Exchange Mechanism for IS-IS  8.1.1
2966 Domain-wide Prefix Distribution with Two-Level IS-IS  8.1.1
3373 Three-Way Handshake for Intermediate System to
Intermediate System (IS-IS) Point-to-Point Adjacencies
 8.1.1
3567 IS-IS Cryptographic Authentication  8.1.1
3784 Intermediate System to Intermediate System (IS-IS)
Extensions in Support of Generalized Multi-Protocol Label
Switching (GMPLS)
 8.1.1
5120 M-ISIS: Multi Topology (MT) Routing in Intermediate
System to Intermediate Systems (IS-ISs)
7.8.1 8.2.1
5306
Restart Signaling for IS-IS
8.3.1 8.3.1
draft-ietf-isis-igp-
p2p-over-lan-06
Point-to-point operation over LAN in link-state routing
protocols
 8.1.1
draft-ietf-isis
-ipv6-06
Routing IPv6 with IS-IS 7.5.1 8.2.1
draft-kaplan-isis-e
xt-eth-02
Extended Ethernet Frame Size Support  8.1.1
Routing Information Protocol (RIP)
FTOS support, per platform
RFC# Full Name S-Series C-Series
E-Series
TeraScale
E-Series
ExaScale
1058 Routing Information Protocol 7.8.1 7.6.1  8.1.1
2453 RIP Version 2 7.8.1 7.6.1  8.1.1