Dell Force10 C150 Configuration Guide

144 | IP Access Control Lists (ACL), Prefix Lists, and Route-maps
www.dell.com | support.dell.com
When you use the log keyword, CP processor logs details about the packets that match. Depending on how
many packets match the log entry and at what rate, the CP may become busy as it has to log these packets’
details.
TCP packets: To create a filter for TCP packets with a specified sequence number, use these commands in
the following sequence, starting in the CONFIGURATION mode:
When you use the
log keyword, CP processor logs details about the packets that match. Depending on how
many packets match the log entry and at what rate, the CP may become busy as it has to log these packets’
details.
UDP packets: To create a filter for UDP packets with a specified sequence number, use these commands
in the following sequence, starting in the CONFIGURATION mode:
2
seq sequence-number {deny |
permit} {ip-protocol-number |
icmp | ip | tcp | udp
}
{
source mask | any | host
ip-address} {destination mask |
any | host ip-address} [operator
port [port]] [count [byte] | log]
[
order] [monitor] [fragments]
CONFIG-EXT-NACL Configure a drop or forward filter.
•
log and monitor options are supported on
E-Series only.
Step Command Syntax Command Mode Purpose
1
ip access-list extended
access-list-name
CONFIGURATION Create an extended IP ACL and assign it a
unique name.
2 seq sequence-number {deny |
permit} tcp {source mask | any
|
host ip-address}} [count
[
byte] | log] [order] [monitor]
[fragments]
CONFIG-EXT-NACL Configure an extended IP ACL filter for TCP
packets.
• log and monitor options are supported on
E-Series only.
Step Command Syntax Command Mode Purpose
1 ip access-list extended
access-list-name
CONFIGURATION Create a extended IP ACL and assign it a unique
name.
2 seq sequence-number {deny |
permit} {ip-protocol-number
udp} {source mask | any |
host ip-address} {destination
mask | any | host ip-address}
[
operator port [port]] [count
[
byte] | log] [order] [monitor]
[
fragments]
CONFIG-EXT-NACL Configure an extended IP ACL filter for UDP
packets.
• log and monitor options are supported on
E-Series only.
Step Command Syntax Command Mode Purpose

Dell Force10 C150 Specifications

General

Brand	Dell
Model	Force10 C150
Category	Server
Language	English