Dell Force10 C150 - Page 365

Force10 Service Agent | 365
Figure 16-9. Configuring an FTSA Policy for a Linecard Down
Figure 16-10. System Log Messages during an a Linecard Down with FTSA
call-home
admin-email pubsadmin@training10.com
smtp server-address 192.168.1.1
no enable-all
server Force10
recipient pubslab@training10.com
keyadd Force10DefaultPublicKey
no encrypt
enable
log-messages delay 60 severity 6
policy lcdown
action-list lcdown
test-list lcdown
policy-test-list lcdown
default-test hardware
policy-action-list lcdown
default-action hardware
no log-only
message-format text
cli-show "show linecard 4 | grep Status" repeat 1 delay 1
R6_E300(conf-callhome)#do offline linecard 4
2d9h24m: %RPM0-P:CP %CHMGR-2-CARD_DOWN: Line card 4 down - card offline
2d9h24m: %RPM0-P:CP %IFMGR-1-DEL_PORT: Removed port: Gi 4/0-47
R6_E300(conf-callhome)#2d9h24m: %RPM1-S:CP %IFMGR-1-DEL_PORT: Removed port: Gi 4/0-47
2d9h24m: %RPM0-P:CP %CALL-HOME-6-CALLHOME: Call-home executes remote exec command
2d9h24m: %RPM0-P:CP %CLI-0-REMOTE-EXEC: remote-exec CP: dhsTestCp
2d9h25m: %RPM0-P:CP %CALL-HOME-6-CALLHOME: Call-home executes remote exec command
2d9h25m: %RPM0-P:CP %CLI-0-REMOTE-EXEC: remote-exec CP: dhsTestCp
2d9h25m: %RPM0-P:CP %CALL-HOME-HELPER-3-CALLHOME: Callhome service sent a message to
Force10 at pubslab@training10.com