Dell Force10 C150 - Electromagnetic Compatibility (EMC); Product Recycling and Disposal

System Management | 59
The configuration in Figure 4-1 creates privilege level 3. This level:
• removes the
resequence command from EXEC mode by requiring a minimum of privilege level 4,
• moves the command
capture bgp-pdu max-buffer-size from EXEC Privilege to EXEC mode by,
requiring a minimum privilege level 3, which is the configured level for VTY 0,
• allows access to CONFIGURATION mode with the
banner command, and
• allows access to INTERFACE and LINE modes are allowed with no commands.
Allow access to INTERFACE, LINE, ROUTE-MAP,
and/or ROUTER mode. Specify all keywords in the
command.
privilege configure level level
{interface | line | route-map |
router} {command-keyword ||...||
command-keyword}
CONFIGURATION
Allow access to a CONFIGURATION, INTERFACE,
LINE, ROUTE-MAP, and/or ROUTER mode command.
privilege {configure |interface |
line | route-map | router} level
level
{command ||...|| command}
CONFIGURATION
Task Command Syntax Command Mode